Industrial automation is to control various parameters in industrial production for the purpose of controlling various processes. In the entire industrial production, manpower operations are minimized, and energy other than animals and various information can be fully utilized for production work, namely It is called industrial automation, and the process that enables industries to automate production is called industrial automation.
my country’s industrial automation equipment development has made great achievements, but mechanical products still have serious problems such as low added value and weak competitiveness. High-end mechanical products still rely heavily on imports. Insufficient product innovation and quality problems are causing this situation. The main reason. There is a shortage of innovative technical talents. Subject to the influence of traditional job-selection concepts and cultural environment, there is a sharp shortage of technical talents engaged in manufacturing. There is a structural shortage of labor in China, a shortage of migrant workers and senior skilled workers, and manufacturing costs have risen sharply. Automation can push its industry forward.
Features of industrial automation equipment:
1. Highly automated procedures without manual operation;
2. High work efficiency, improve enterprise production efficiency;
3. The production process of the whole process is stable and the consistency of the product is improved;
4. It is suitable for mass production and reduces the production cost of enterprises.
Ultraviolet tube is a tube made of ultraviolet light. It is widely used in bamboo and wood flooring, furniture, decoration materials, printing, printed iron cans, plastic coating, signs, circuit boards, optical discs and other industries; UV lamps are also ideal light sources for bonding and curing of semiconductors, electronic components, and liquid crystals.
When ultraviolet light penetrates an object, the energy is absorbed. More than 95% of the UV energy will pass through a good quality quartz sleeve. The penetration rate of ultraviolet rays in water will vary with the type and amount of undissolved and suspended solids in the water. Through sampling and testing, the liquid's ability to absorb ultraviolet energy at 254 nanometers-called the effective absorption value (C of A) can be measured.
Note for UV lamps:
1. It is strictly forbidden to start the ultraviolet lamp frequently, especially in a short time, to ensure the life of the ultraviolet lamp.
2. Regular cleaning: According to the water quality, the ultraviolet lamp and the quartz glass sleeve need to be cleaned regularly. Wipe the lamp with an alcohol cotton ball or gauze to remove the dirt on the quartz glass sleeve and clean it, so as not to affect the transmittance of ultraviolet rays. , And affect the sterilization effect.
3. When replacing the lamp, first unplug the lamp power socket, pull out the lamp, and then carefully insert the cleaned new lamp into the sterilizer, install the sealing ring, check for water leakage, and then plug in the power supply . Be careful not to touch the quartz glass of the new lamp with your fingers, otherwise it will affect the sterilization effect due to stains.
4. Prevention of ultraviolet radiation: ultraviolet rays have strong killing power on bacteria, and also have certain harm to human body. When starting the disinfection lamp, avoid direct exposure to the human body. If necessary, use protective glasses. Do not directly look at the light source with your eyes. Burns the eye mask.
Recommend a UV detector used in industrial automation equipment to detect whether the UV tube is normally luminous, the high-quality UV detector imported from abroad-GUVC-T10GD-LA5, the sensor size is 36 x 30 x 16mm, air environment, Single power supply voltage, analog voltage output. Power supply voltage: DC 1.8~5.5V, typical 5V, current: 0.05mA. It is widely used in UV lamp/LED monitoring, UV power measurement and other fields.
